Summary: This article is going to explain to you the steps to be followed to fix “The Volume Does Not Contain a Recognized File System” error message.
The error message “The Volume Does Not Contain a Recognized File System” is not something unusual to happen. Many of us may have encountered this error message while pursuing our day to day work.
At times, when you try to connect the external hard drive, USB flash drive, SD memory card to the computer, you might be warned a prompt like this: You need to format the disk in drive before you can use it.
If there having vital files on it, you should click Cancel and there’s a prompt going to be shown up. F:\ is not accessible, the volume does not contain a recognized file system, please make sure that all required file system drivers are loaded and that the volume is not corrupted.
This usually happens because of the RAW file system, when the file system type information goes missing or unstable between multiple system tables. There can be many reasons for this to happen. Do not worry! We have got you covered. This article will provide you with a possible solution to overcome the issue without losing your relevant data.
Table of Contents
What causes the message “The Volume Does Not Contain a Recognized File System” to occur?
The issue “The Volume Does Not Contain a Recognized File System” often takes places when you forcibly eject your external storage device from the computer system without choosing the option “Eject Safely”.
Nonetheless, this issue does not only pertain to your external hard drive, SD card or USB flash drive but also to the computer’s internal hard drive. Following are various factors that cause the error of the drive is not showing up to occur.
- The system being re-installed.
- Virus or malware attack.
- A non-procedural shutdown of the computer.
- Failure in file system conversion.
- Deletion of the essential file system by mistake.
- Inconsistent power supply.
- Any physical failure such as a bad sector.
Solutions to Remove the Error “The Volume Does Not Contain a Recognized File System”
Before we head towards the possible ways to eliminate the error message “The Volume Does Not Contain a Recognized File System”, we should realize that the storage drive has turned to RAW disk; you can even check the properties by right-clicking on the drive and find it showing as 0 bytes.
To get back the data on the drive, we shouldn’t format the disk first; alternatively, we should retrieve data using “Bitwar Data Recovery Software” for quality results. It is premium RAW data recovery software which can help you retrieve inaccessible data with original file name! Here are the steps to use this software to recover data from your system:
Data recovery using Bitwar Data Recovery Software:
Step1: Download Bitwar Data Recovery Software from the official website https://www.r-datarecovery.com. The software is compatible with both Mac and Windows operating system 10, 8, 7. After downloading, install the software.
Download for PCDownload for Mac
Step2: Once recovery software is installed, launch it on your Windows device and select the drive that shows as NTFS_RAW, e.g. if your drive’s former file system is NTFS, then click on “Next” button.
Step3: Select “Quick Scan” mode to retrieve lost data. The data will be fully recovered if any other data are not overriding it.
Step4: Now, select the type of files you want to recover. You can also choose to select “Select All Types” option to scan all the files in case you are not sure about the type of files to be restored and click on “Next”.
Step5: Now, you will be able to see the listing of all the scanned files, you can filter out the desired files to be recovered by their name, path, type and time along with an option to preview the selected files.
Step6: After selecting the desired files, click on the “Recover” button and save the files to any other location in your system or the external storage device.
Tips: If you are unable to retrieve all the data with a “Quick Scan” mode, then try “Deep Scan” mode to look for the data in each sector of the hard drive. Deep scan mode will take more time as compared to the Quick scan; also, the original file name will not remain the same after the scan.
Once you have successfully recovered the lost data, follow below steps to fix The Volume Does Not Contain a Recognized File System error.
Solution 1: Convert the Raw Drive to NFTS/FAT32
Step1: Click on the “Start” button and go to “My Computer” by right-clicking on it.
Step2: After this, click on “Manage” and choose “Disk Management”.
Step3: From the Disk Management, select the RAW drive by right-clicking on it and choose the format,
Step4: Now, Select the file system to NTFS, and check to perform a quick format.
Step5: Finally, click on the “OK” button to fix the error The Volume Does Not Contain a Recognized File System.
Following the above-stated steps, you will be able to repair the system on the storage device. Or, you can also try with the below quick fix if you don’t know how to find Disk Management.
Solution 2: Click on format button by re-connecting the drive.
After getting back the data we need, it’s also a quick fix by using the format tool from the system’s prompt.
Step 1. Connect the drive to the computer and wait for the prompt: you need to format the disk in drive before you can use it.
Step 2. click on the format disk button and wait for the processing to finish.
Conclusion:
Anyone can come across the issue “The Volume Does Not Contain a Recognized File System” because of any of the reasons as stated in the article. There is no need to worry if you encounter this problem as applying the above-given solutions will help you in solving the concern.
All you need to do is to recover all your essential data at the onset, especially not click on format disk before restoring the needed data to prevent data loss, and then follow the steps to solve the issue. Recovery is one critical process when dealing with such issues; therefore, it is vital to choose a recovery tool that will assure authentic results.
Bitwar Data Recovery Software is highly efficient, reliable, quick and user-friendly. It provides 100% recovery and promises to keep your data safe! So, recover any kind of data using Bitwar Data Recovery software now!
Download for PCDownload for Mac